Computers/Controls - IHKA/FKA/CON Programming Fails

SI B 09 01 09
Programming/Coding Explanations

April 2009
Technical Service

SUBJECT
Programming Fails for the IHKA, FKA, or CON

MODEL
F01, F02 (7 Series)

Vehicles produced up to November 12, 2008

SITUATION
One of the following control modules fails to program with ISTA/P:

^ IHKA (Integrated Automatic Climate Control)

^ FKA (Rear Automatic Climate Control Module)

^ CON (Central Controller)

CAUSE
The wrong information has been stored in the memory range for the control modules, which causes programming of these control modules to fail.

PROCEDURE
Replace the control module that fails.





WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.





Disclaimer