Compatibility Check For USB Devices

Compatibility Check For USB Devices

Systems concerned: Interface box, Combox multimedia for R56/ E65/ E60/ E87/ E90/ E70/ F01/ F02/ F03/ F04/ F07/ F10/ F11/ F25
Diagnosis is only possible for systems approved by BMW. All the information on this topic can be found in the information bulletin USB valid for your country. More precise information on the storage location of the current information bulletin USB that applies to you can be obtained from your subsidiary.

Procedure for compatibility check of the present USB device
1. Download the current version of the USB product information.
2. Compile USB device data:
- Designation of USB device
- If applicable, software version of the USB device
3. Compile control-unit data:
- Control unit software version (BMW part number)
4. Use the USB device data, control-unit data and the USB product information to determine whether the present USB device is approved by BMW for this vehicle.

NOTE: The diagnostic ranges offered on the Integrated Service Information Display apply to recommended USB devices. If the USB device is approved in the product information for restricted use only, the restrictions of the USB device have priority over the diagnosis instructions.