Removing and Installing/Replacing Outer Cover on Left or Right Front Seat Backrest (Normal/Manual)

52 13 040 - Removing and installing/replacing outer cover on left or right front seat backrest (normal / manual)





Special tools required:






Necessary preliminary tasks:
- Remove front seat Removing and Installing Left or Right Front Seat (Normal / Manual)





Note:
Picture shows installed seat by way of example.

Raise lock (3) and lever out handle

1. for backrest angle adjustment and
2. for seat height adjustment with special tool 00 9 317.





Release screw (1).
Tightening torque 52 10 06AZ 52 10 Front Seats.

Note:
Trim (2) is engaged in marked area.

Press lock (3) and pull trim (2) off seat mechanism.

If necessary, lever out carefully with special tool 00 9 317.





If necessary, unlock plug connection (1) for backrest width adjustment and disconnect.
If necessary, unlock plug connection (2) for lumbar support and disconnect.





Replacement:
If necessary, remove backrest width adjustment switch and lumbar support switch.

Installation:
Make sure backrest width adjustment and lumbar support switches are correctly engaged.