33 55 021 Replacing Both Rubber Mounts For Anti-Roll Bar Mounting

33 55 021 Replacing Both Rubber Mounts For Anti-roll Bar Mounting







Necessary preliminary tasks:
- Remove rear wheels.
- Lower rear axle support.







Release screws (1).
Tightening torque, 33 55 1AZ.
Remove retaining bracket (2) and rubber mount (3).

Installation note:
Keep retaining bracket (2), rubber mount (3) and anti-roll bar clean and free from oil and grease.
Clean rear anti-roll bar on both sides.
Position rubber mount on rear anti-roll bar.
Position retaining bracket on rubber mount.
Push rubber mount with retaining bracket on rear anti-roll bar to installation position.