Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

84 11 519 Removing and Installing/Replacing Eject Box

84 11 519 - Removing and installing or replacing eject box

Special tools required:

Pull off gaiter (1) towards top.

Disconnect plug connection (2).

Unclip plug connection for antenna lead from mounting and disconnect.

Snap out eject box (1) with special tool 00 9 340 on inner side of trim (2).

Pull eject box (1) on inner side upwards slightly.

Snap out eject box (1) with special tool 00 9 340 on outer side of trim (2).

Lift out eject box (1) and feed out wiring harness.

Installation:
Make sure wiring harness is correctly laid.

Eject box (1) must snap audibly into trim (2).

Installation:
Catches (1) on trim (2) must not be damaged or missing.