33 41 151 Replacing Left or Right Wheel Bearing on Rear Axle Shaft

33 41 151 Replacing left or right wheel bearing on rear axle shaft





Important!
Do not damage multipole impulse ring.





Necessary preliminary tasks:
^ Remove drive flange for rear axle shaft

Note:
^ Check brake pads and renew if necessary!

Release screws.

Tightening torque 33 41 2AZ.

Remove wheel bearing.

Installation note:





Replace screws.





Illustrations show F01/02:

Installation note:
Keep contact surface (2) of wheel bearing/wheel carrier clean and free from oil and grease.





After installation:
Only F01/02/F04/07:
^ Adjusting parking brake