P0113

108001 - P0113

Information saved in
DME

Fault code
108001 - P0113

Fault text
Intake air temperature sensor, electrical: Short circuit to B+

Fault description
The diagnostic function monitors the upper voltage limit on
the intake-air temperature sensor on Bank 1.

Condition for fault identification
Test condition:
The fault is recognized when the voltage of the intake-air
temperature sensor > 3.17 V.
Potential problem source(s):
- Defect in wiring harness
- Intake air temperature sensor defective
Terminal condition: Terminal 15
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- Time after end of start phase > 60 sec.
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 1.5 sec.

Action in service
- Visual examination of plug-in contacts (at component and
DME ends) Perform electrical measurements on sensor wire,
power supply and ground (possible intermittent open!)
- Replace sensor

Fault effect and breakdown warning
Breakdown notice:
- none
Possible apparent symptoms:
- none

Driver information
Warning light:
- ECE emissions warning lamp: on
- US emissions warning lamp: on
- ECE electronic engine power reduction: off
- US electronic engine power reduction: off
- CC message: none

Service instruction
- none