P16B0

200308 - P16B0

Information saved in
DME

Fault code
200308 - P16B0

Fault text
DME, internal fault, monitoring accelerator-pedal module:
malfunction

Fault description
The diagnostic function monitors internal operations within
the control module to ensure that they are executed
correctly.
(here with regard to pedal-travel sensor)

Condition for fault identification
Test condition:
The fault is recognized when an internal comparison detects
excessively high deviations.
Potential problem source(s):
- Collateral fault from accelerator pedal travel sensor
- Defective DME
Terminal condition: Terminal 15
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 0.5 sec.

Action in service
- If diagnostic fault codes related to the pedal-travel sensor
are logged, repair these faults first
- If the diagnostic fault code has been entered with a
frequency > 3, then replace the DME

Fault effect and breakdown warning
Breakdown notice:
- Allow vehicle to enter sleep mode, then restart may resolve
the problem, although the remedy may only be temporary
Possible apparent symptoms:
- '- Refuses to respond to accelerator
- Pronounced shaking at idle

Driver information
Warning light:
- ECE emissions warning lamp: on
- US emissions warning lamp: on
- ECE electronic engine power reduction: on
- US electronic engine power reduction: on
- CC message: on

Service instruction
- none