P16B8

200602 - P16B8

Information saved in
DME

Fault code
200602 - P16B8

Fault text
DME, internal fault, monitoring setpoint torque: minimum
clutch torque implausible

Fault description
The diagnostic function monitors internal operations within
the control module to ensure that they are executed
correctly.
(Here regarding minimum clutch torque)

Condition for fault identification
Test condition:
The fault is recognized when an internal comparison detects
excessively high deviations.
Potential problem source(s):
- DME defective
Terminal condition: Terminal 15
Voltage condition:
- None
Temperature condition:
- None
Time condition:
- None
Other conditions:
- none

Condition for fault memory entry
This fault is logged in the control module's fault memory if
it remains present for longer than 0.5 sec.

Action in service
- If the diagnostic fault code has been entered with a
frequency > 3, then replace the DME

Fault effect and breakdown warning
Breakdown notice:
- Allow vehicle to enter sleep mode, then restart may resolve
the problem, although the remedy may only be temporary
Possible apparent symptoms:
- '- Refuses to respond to accelerator
- Pronounced shaking at idle

Driver information
Warning light:
- ECE emissions warning lamp: on
- US emissions warning lamp: on
- ECE electronic engine power reduction: on
- US electronic engine power reduction: on
- CC message: on

Service instruction
- none