Operation CHARM: Car repair manuals for everyone.
Home >> BMW >> 2012 >> 650i Convertible (F12) V8-4.4L Turbo (N63) >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Air Flow Meter/Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Air Flow Meter/Sensor: Service and Repair



13 62 560 Removing And Installing/Replacing Left Or Right Hot Film Air Mass Meter (N63)







Necessary preliminary work:
- Read out the fault memory of the DME control unit.
- Switch off ignition.
- Remove acoustic cover







Picture shows the left side, the procedure for the right side is identical.
Release connector (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 6AZ.
Pull hot film air mass meter (3) out of upper section of intake silencer housing.

Installation note:
Replace gasket on hot film air mass meter.







NOTE:
Check stored fault message.
Delete fault memory.





pro multis · About Operation CHARM