13 62 594 Removing and Installing/Replacing Pressure Sensor on Right Intake Plenum

13 62 594 Removing and installing/replacing pressure sensor on right intake plenum (N63)







Necessary preliminary work:
- Read out DME fault memory.
- Switch off ignition.
- Remove electronics box.
- Draw off A/C system.
- Secure engine in installation position.







Release screw (1).
Tightening torque 64 53 3AZ.
Detach A/C line (2) and place to one side.
Replace sealing ring on A/C line.







Unlock connector (1) and remove.
Release screws (2) with a reversible ratchet, extension, universal joint and a magnetic Torx socket.
Tightening torque 13 62 2AZ.
Pull pressure sensor (3) out of left intake plenum.

Installation note:
Coat sealing ring with lubricant.







Installation note:
Delete fault memory.