Fluid Change

1. Reserve front and side oil pan attaching bolts, then loosen the rear oil pan attaching bolts.

2. Carefully pry oil pan loose and allow fluid to drain into a suitable container.

3. Remove the oil pan and gasket, then remove the screen attaching bolts and remove screen.

4. Thoroughly clean oil screen and oil pan with solvent.

5. Install oil screen using a new gasket, then install oil pan using a new gasket and torque attaching bolts to 9 ft lbs.

6. Add specified amount of fluid, then with engine idling and parking brake applied, move selector lever through each range and return selector lever to PARK.

7. Check fluid level and add fluid as required to bring level between the two dimples on the dipstick.