Shift Solenoid: Service and Repair

Fig.16 Electrical Component Locations:

REPLACE
1. Raise and support vehicle.
2. Remove oil pan, oil filter and filter seal.
3. Remove accumulator cover bolts.
4. Remove 1-2 accumulator cover, piston and spring.
5. Disconnect control and shift solenoid electrical connectors.
6. Remove pressure control solenoid retainer bolt, then the retainer and solenoid, Fig. 16.
7. Remove shift solenoid retainers and shift solenoids.
8. Remove 3-2 control solenoid retainer and control solenoid.
9. Reverse procedure to install.