With Reclining Split Bench

Battery voltage is applied at all times to the LH and RH Recliner Switches. The Recliner Switches normally ground both sides of the Recliner Motors. When the Recliner Switch is moved to "RECLINE," battery voltage is applied to one side of the Recliner Motor. With the Recliner Motor grounded through the "FWD" contacts of the Recliner Switch, the Recliner Motor turns to recline the seat back. When the Recliner Switch is moved to "FWD," battery voltage is applied to one side of the Recliner Motor. With the Recliner Motor grounded through the "RECLINE" contacts of the Recliner Switch, the Recliner Motor turns to raise the seat back.