Troubleshooting Hints

Perform before beginning System Diagnosis
1. Check that Cruise Control Module Linkage is connected and moving freely.
2. Check Cruise Cable Adjustment.

^ Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a Continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible should be checked by monitoring for a voltage drop with the system operational (under load).

^ Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems.

^ Refer to System Diagnosis. Testing and Inspection