Control Assembly, HVAC

Heater And A/C Control:

REMOVE OR DISCONNECT
1. Instrument Panel (I/P) lower trim plates (snap out).
2. Air deflectors.
3. I/P accessory trim plate screws.
4. I/P accessory trim plate.
5. Heater and A/C control screws.
6. Heater and A/C control.

INSTALL OR CONNECT
1. Heater and A/C control.
2. Heater and A/C control retaining screws.
- Tighten screws to 1.9 Nm (17 lb. in.).
3. I/P accessory trim plate.
4. Trim plate retaining screws.
- Tighten screws to 1.9 Nm (17 lb. in.).
5. Air deflectors (snap in).
6. I/P lower trim plate (snap in).