Throttle Position Sensor: Service and Repair

Throttle Body Assembly:

REMOVE OR DISCONNECT
1. Idle Air Control (IAC), Throttle Position (TP) sensor, Mass Air Flow (MAF) sensor, and Exhaust Gas Recirculation (EGR) electrical connectors.
2. Two TP sensor attaching screws.

INSTALL OR CONNECT
1. With throttle valve in the normal closed idle position, install throttle position sensor on throttle body assembly, making sure the TP sensor pickup lever is located ABOVE the tang on throttle actuating lever.
2. Two TP sensor screws using a thread-locking compound on the screws.
3. IAC, TP sensor, MAF sensor, and EGR electrical connectors.