General Brake Specifications
| Front | Discard Thickness All brake rotors have a discard dimension cast into them. This is a wear dimension and not a refinish dimension. Any rotor which does not meet the specification should be replaced. | 1.209 Inch (in) |
| Lateral Runout | 0.002 Inch (in) | |
| Minimum Thickness After Refinishing | 1.224 Inch (in) | |
| Rotor Diameter | 11.8 Inch (in) | |
| Rotor Thickness (Max) | 1.267 Inch (in) | |
| Thickness Variation | 0.0005 Inch (in) | |
| Rear | Discard Thickness All brake rotors have a discard dimension cast into them. This is a wear dimension and not a refinish dimension. Any rotor which does not meet the specification should be replaced. | 0.374 Inch (in) |
| Maximum Lateral Runout | 0.002 Inch (in) | |
| Maximum Thickness Variation | 0.0005 Inch (in) | |
| Minimum Thickness After Refinishing | 0.433 Inch (in) | |
| Rotor Diameter | 11.06 Inch (in) | |
| Rotor Thickness (NEW) | 0.433 Inch (in) |