Wiper Park Switch Assembly Replacement

Description:

Remove or Disconnect
1. Wiper motor assembly.
2. Wiper motor cover assembly.
IMPORTANT
^ If wiper motor is in park position, operate wiper motor as required to remove pawl from relay slot.
3. Screw (30) and park switch assembly (31) from wiper motor assembly (22).

Install or Connect

NOTICE: Refer to Vehicle Damage Warnings / Fastener Requirements. Service Precautions

1. Park switch assembly (31) with screw (30).
2. Operate wiper motor assembly (22) back into park position (pawl is in relay slot).
3. Wiper motor cover assembly on wiper motor.
4. Wiper motor on vehicle.