Operation CHARM: Car repair manuals for everyone.
Home >> Buick >> 1997 >> Skylark V6-3100 3.1L VIN M SFI >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Powertrain Management >> Relays and Modules - Computers and Control Systems >> Knock Sensor Module >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Knock Sensor Module: Service and Repair

Knock Sensor Installation:




Squeezing Knock Sensor Tabs:






REMOVE OR DISCONNECT
1. Remove the PCM. Refer to PCM/EEPROM Replacement/Programming.
2. Remove the access cover from the PCM.
3. Carefully squeeze the latches on the Knock Sensor (KS) Module and carefully remove the KS Module. Apply pressure in the direction as shown.

INSTALL OR CONNECT
1. Carefully insert the KS module into the socket.
2. Carefully press down on the KS Module until the latches catch.
3. Install the PCM access cover.
4. Install the PCM.
pro multis · About Operation CHARM