Body Control Module: Service and Repair

Standard Body Module:

Relay/fuse Center:

1. Right sound insulator.
2. Disconnect negative battery cable.
3. SBM module or Heater and A/C Control connector.
^ Spread latch tabs on sides of bracket while moving module slightly rearward.
^ Pull down on module to remove from mounting bracket.
4. Module from bracket.

INSTALL OR CONNECT
1. Module to bracket.
^ Slide module upward and slightly rearward into bracket until locking tabs engage.
2. Right sound insulator.
3. Negative battery cable.
4. Refer to Heating Ventilating and Air Conditioning for heater and A/C control programming procedure. Heating and Air Conditioning