Power Window Module

Removal Procedure

1. Remove the door trim panel.
2. Remove the water deflector.
3. Remove the speaker assembly.
4. Remove the window.
5. Disconnect the lock rod from the outside door handle.
6. Disconnect the outside handle rod.
7. Remove the 3 screws from the door latch assembly.
8. Remove the 3 upper bolts (2) from the module (1).
9. Loosen the 3 lower captive bolts (3).
10. Remove the module (1).

Installation Procedure

1. Install the module (1).
7. Install the 3 upper bolts (2).
8. Tighten all 6 bolts (2,3).

Tighten
Tighten the attaching bolts to 10 N.m (89 lb in).

9. Install the 3 screws to the lock assembly.
10. Tighten the lock assembly fasteners.

Tighten
Tighten the fasteners to 10 N.m (89 lb in).

11. Install the lock rods to the outside handle.
12. Install the window.
13. Install the speaker assembly.
14. Install the trim panel bracket (1).
16. Install the water deflector.
17. Install the door trim panel.