Changing the Automatic Door Lock/Unlock Mode

Automatic Door Lock/Unlock Modes Description Table:

Two ways to change the automatic door lock/unlock mode:
^ Tech 2 scan tool method. Refer to Tech 2 user's manual for menu navigation instructions.
^ Door lock switch method.

Perform following procedure to change the automatic door lock/unlock mode using the door lock switch method:
1. Close all vehicle doors.
2. Turn the ignition switch to the RUN position.
3. Step firmly and hold brake pedal.
4. Press and hold lock on either door lock switch.
5. While holding lock on the door lock switch, shift the transaxle out PARK, then back into PARK.
6. To advance the mode, shift the transaxle out PARK, then back into PARK again.
^ The BCM sounds the chime a number of times equivalent to the automatic door lock/unlock mode. A transition past mode 4 repeats the sequence starting with mode 1.
^ To exit and save the current customization mode: Release the door lock switch when obtaining desired mode.
^ Mode 3 is set when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.