Remote Control Door Lock Receiver Replacement

REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Disconnect the lower electrical connector.
3. Remove the 2 push-in retainers (1) that secure the RFA module (3) to the bottom of the package shelf.

INSTALLATION PROCEDURE
1. Install the retainers (1) for the RFA module (3) onto the package shelf.
2. Connect the electrical connector.
3. Close the rear compartment lid.
4. If replacing the RFA module program the RPO options. Refer to Remote Control Door Lock Reprogramming. Remote Control Door Lock Reprogramming