Auxiliary Power Outlet: Service and Repair

Power Accessory Port Replace - Front Floor Console





REMOVAL PROCEDURE
1. Remove the front floor console.
2. Disconnect the electrical connector from the front floor console power accessory port.
3. Use a small flat-bladed tool in order to release the retainers, and remove the front floor console power accessory port from the front floor console.

INSTALLATION PROCEDURE
1. Align the front floor console power accessory port to the hole in the front floor console.
2. Press the front floor console power accessory port into the hole until fully seated.
3. Connect the electrical connector to the front floor console power accessory port until fully seated.
4. Install the front floor console.