Interior - Power Window Switch Removal Revision

Bulletin No.: 06-08-64-005

Date: January 31, 2006

SERVICE MANUAL UPDATE

Subject:
Revised Power Window Switch Replacement

Models:
1998-1999 Buick Century, Regal

This bulletin is being issued to revise the Power Window Switch Replacement procedure in the Doors sub-section of the Service Manual. Please replace the current information in the Service Manual with the following information.

The following information has been updated within SI. If you are using a paper version of this Service Manual, please make a reference to this bulletin on the affected page.

When removing a power window switch (front or rear door), insert a plastic, flat-bladed tool at the front edge of the switch mounting plate. Press rearward to release the mounting plate retainer and lift up on the front of the plate.





Disclaimer