Disabling the Theft Deterrent Feature

Enter the secret code as follows, pausing no more than 15 seconds between steps:
1. Turn the ignition to one of the following positions:
^ ACC
^ RUN
2. Turn the radio OFF.
3. Perform the following steps:
3.1. Press the 1 and 4 buttons together.
3.2. Hold the buttons down until SEC shows on the display.
4. Press MN. 000 will appear on the display.
5. Press MN again in order to make the last 2 digits agree with the code.
6. Press HR in order to make the first 1 or 2 digits agree with the code.
7. Press AM/FM after you have confirmed that the code matches the secret code that was written down. The display will show - - -, indicating that the radio is no longer secured.

If the code entered is incorrect, SEC will appear on the display. The radio will remain secured until the correct code is entered.

When battery power is given to a secured radio, the following conditions occur:
^ The radio does not turn ON.
^ LOC will appear on the display.