Operation CHARM: Car repair manuals for everyone.

Radio Controls

PWR-VOL CONTROL
The system will turn ON with a momentary delay with the ignition in the RUN or in the ACCESSORY position and rotating the upper knob clockwise. The station frequency is displayed and then the time of day is displayed. Rotate the knob clockwise to increase the volume. Rotate the knob counterclockwise to decrease the volume.

RECALL (RADIO) CONTROL
When the system is ON pressing RECALL will display (or recall) the station being played. When the ignition is OFF pressing RECALL will display the time of day.

BASS CONTROL
Push the BASS Control knob to release it. Rotate the knob to the right to increase bass. Rotate the knob to the left to decrease bass. Push the knob back in to store it when not adjusting.

TREB CONTROL
Push the TREB knob to release it. Rotate the knob to the right to increase treble. Rotate the knob to the left to decrease treble. Push the knob back in to store it when not adjusting.

BAL CONTROL
Push the BAL Control knob to release it. Rotate the knob to move sound between the right and left speakers. Push the knob back in to store it when not adjusting.

FADE CONTROL
Push the FADE Control knob to release it. Rotate the knob to move sound between the front and the rear speakers. Push the knob back in to store it when not adjusting.

TUNE CONTROL
Push the TUNE Control knob to release it. Rotate the knob to choose desired radio stations. Push the knob back in to store it when not adjusting.

SEEK (RADIO) CONTROL
Press SEEK> or
AM/FM (RADIO) CONTROL
Press AM/FM to receive AM, FM1, or FM2 band. The selection will appear on the VF display.

P SCAN CONTROL
Press P SCAN to hear each of the present stations for a few seconds. Press P SCAN again to stop at a chosen station.

AUTO TONE CONTROL
Press AUTO TONE to choose preset treble and bass equalization settings designed for one of the following:
^ ROCK
^ NEWS
^ POP
^ CLASSICAL
^ JAZZ
^ MAN

Each time AUTO TONE is pressed, another setting will appear on the display. When MAN (manual) appears the control of the tone will be back to the treble and bass knobs.

ST (STEREO) INDICATOR
ST will appear on the VF display whenever a FM stereo broadcast is selected.

PUSH BUTTONS (NUMBERED)
A total of 18 stations can be preset. Six AM stations can be preset. Six FM1 stations can be preset. Six FM2 stations can be preset. The following is the preset stations procedure:
1. Tune in the desired station (in the desired band; AM, FM1, or FM2).
2. Press and hold one of the six push buttons for 5 seconds. The station will fade out and then return when set. The present station will return whenever that button is pressed.
Repeat these steps for each push button.

CLOCK
The time will appear on the VF display. To set the time perform the following procedure:
1. Press and hold HR (hour) until the correct hour appears.
2. Press and hold MIN (minute) until the correct minute appears.

There will be a 2-second delay before the clock goes into the time set mode.

Press RECALL to display the time when the ignition is OFF.