Amplifier

REMOVAL PROCEDURE
1. Remove the rear shelf trim panel.
2. Remove the rear seat sound barrier.
3. Disconnect the electrical connectors from the low frequency audio amplifier.
4. Loosen the nuts on the low frequency audio amplifier.
5. Remove the low frequency audio amplifier to the right and down.
6. Remove the low frequency audio amplifier from the rear shelf.

INSTALLATION PROCEDURE
1. Align the studs to the rear window panel slots and slide into place.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Tighten the nuts on the low frequency audio amplifier.

Tighten
Tighten the nuts on the low frequency audio amplified to 6 N.m (53 lb in).

3. Connect the electrical connectors to the low frequency audio amplifier.
4. Install the rear seat sound barrier.
5. Install the rear shelf trim panel.