Removing Customer's Code

IMPORTANT: Either the customer's code or the factory backup code can be used to remove the customer's code.

1. Turn the ignition to the "ACC" or "RUN" position.
2. With the radio off, hold in pushbuttons "1" and "4" for about 6 seconds until the display changes to "SEC".

Important: If the display changes to "- - -", the theft deterrent is already deactivated and no code is stored.

3. Press the "HR" button.
4. Set the first two digits (0-19) of the code with the "HR" button.
5. Set the next two digits (0-99) of the code with the "MN" button.
6. Press "AM-FM" button to enter the code.
7. The theft deterrent is deactivated, "- - - " is displayed and then the clock is displayed.