Door Handle Rod Adjustment - Rear Outside

REMOVAL PROCEDURE




1. Remove the trim panel.
2. Remove the water deflector as needed.
3. Use side cutters in order to cut off the outside handle rod-to-lock clip from the lock.
4. Unscrew the remainder of the clip from the outside handle rod.
5. Discard the clip.

INSTALLATION PROCEDURE




1. In order to adjust snap a new outside handle rod-to-lock clip onto the door lock lever.
2. Position the outside door handle rod in the clip in order to eliminate any free play in the outside door handle.
3. Snap the clip cover closed over the threaded outside door handle rod.
4. Install the water deflector as needed.
5. Install the trim panel.
6. Inspect the door lock system for proper operation. Refer to Automatic Door Lock System Description.