Rear Door Removal and Replacement

REMOVAL PROCEDURE




1. Remove the conduit.
2. Support the door.
3. Remove the intermediate door hinge bolts
4. Remove the door.

INSTALLATION PROCEDURE




1. Install the door.

NOTE: Refer to Fastener Notice in Service Precautions.

IMPORTANT: Use Loctite(R) Blue GM P/N 12345382 or equivalent prior to installing the fasteners.

2. Install the intermediate door hinge bolts.

Tighten
Tighten the intermediate door hinge bolts to 33 N.m (24 lb ft).

3. Remove the support.
4. Install the conduit.