Instrument Panel (IP) - Insulator Replacement - Right

REMOVAL PROCEDURE




TOOLS REQUIRED
J 38778 Door Trim Clip Remover

1. Use the J 38778 in order to remove the RH Instrument Panel (IP) insulator retainers.
2. Adjust the carpeting for access.




3. Disconnect the courtesy lamp from the instrument panel insulator by turning 1/4 turn counterclockwise.
4. Remove the RH IP insulator.

INSTALLATION PROCEDURE




1. Position the RH Instrument Panel (IP) insulator to the to the floorpan beneath the IP.
2. Install the courtesy lamp to the IP insulator then rotate 1/4 turn clockwise to secure.





IMPORTANT: Make sure that the RH IP insulator does not block the floor heater outlet.

3. Install the RH IP insulator retainers.

4. Return the carpet to the original position.