Automatic Door Lock Relock

The BCM locks all of the doors when the following conditions exist:
^ Automatic door lock/unlock is in one of the following modes:
^ Mode 2
^ Mode 3
^ Mode 4
^ All of the vehicle doors are closed.
Closed vehicle doors cause an open signal in CKT 49 and CKT 727.
^ The ignition switch is in the RUN position.
^ A transaxle range switch PRNDL signal is transmitted to the transaxle via the Class II serial data link.
^ You press UNLOCK on either door lock switch.
^ A vehicle door is open.
An open door causes a ground signal in CKT 49 or CKT 727.
^ All of the vehicle doors are closed.
Open vehicle doors cause an open signal in CKT 49 and CKT 727.