Feature Customization

AUTOMATIC DOOR LOCK/UNLOCK MODES
There are four automatic door lock/unlock modes:
^ Mode 1
The automatic door lock/unlock feature is disabled.

^ Mode 2
- All of the doors lock when you shift the transaxle out of PARK.
- There is no automatic door lock.
- The automatic door lock relock feature is active.

^ Mode 3
- All of the doors lock when you shift the transaxle out of PARK.
- All of the doors unlock when you shift the transaxle out of PARK.
- The automatic door lock relock feature is active.

^ Mode 4
- All of the doors lock when you shift the transaxle out of PARK.
- The driver door unlocks when you shift the transaxle into PARK.
- The automatic door lock relock feature is active.

CHANGING THE AUTOMATIC DOOR LOCK/UNLOCK MODE
There are two ways to change the automatic door lock/unlock mode:
^ The Tech 2 scan tool method
Complete the following steps in order to change the automatic door lock/unlock mode using the Tech 2 scan tool method:
^ At the SELECT SYSTEM screen select BODY.
^ Then select the car line and nameplate.
^ At the APPLICATION MENU screen select PERSONALIZATION.
^ At the next APPLICATION MENU screen select SET OPTIONS.
^ At the next APPLICATION MENU screen select the mode you want.
^ The door lock switch method.

Complete the following steps in order to change the automatic door lock/unlock mode using the door lock switch method:
1. Close all of the vehicle doors.
2. Turn the ignition switch to the RUN position.
3. Firmly depress and hold the brake pedal.
4. Press and hold LOCK on either door lock switch.
5. Hold LOCK on the door lock switch and complete the following steps:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
6. Complete the following steps in order to advance the mode:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
7. The BCM sounds the chime a number of times equal to the automatic door lock/unlock mode. A transition past mode 4 repeats the sequence starting with mode 1.
Release the door lock when you obtain the desired mode. Releasing the door lock will exit and save the current customization mode.

Mode 3 is set when the vehicle is manufactured. Disconnecting the battery for up to a year will not change the mode.

LAST DOOR CLOSED LOCKING MODE
There are two last door closed locking modes:
^ Mode 1
The last door closed locking feature is disabled.

^ Mode 2
The last door closed locking feature is enabled.

CHANGING THE LAST DOOR LOCKING MODE
There are two ways to change the last door locking mode:
^ The Tech 2 scan tool method
^ Complete the following steps in order to change the last door locking mode using the Tech 2 scan tool method:
^ At the SELECT SYSTEM screen select BODY.
^ Then select the car line and nameplate.
^ At the APPLICATION MENU screen select PERSONALIZATION.
^ At the next APPLICATION MENU screen select SET OPTIONS.
^ At the next APPLICATION MENU screen select the mode you want.
^ The door lock switch method.

Complete the following steps in order to change the last door closed locking mode using the door lock switch method:
1. Close all of the vehicle doors.
2. Turn the ignition switch to the RUN position.
3. Firmly depress and hold the brake pedal.
4. Press and hold UNLOCK on either door lock switch.
5. Hold UNLOCK and complete the following steps:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
6. Complete the following steps in order to change the last door closed locking mode:
^ Shift the transaxle out of PARK.
^ Shift the transaxle back into PARK.
7. The BCM sounds the chime once when the last door closed locking mode is disabled. The BCM sounds the chime twice when the last door closed locking mode is enabled.
Release the door lock switch when you obtain the desired mode. Releasing the switch will exit and save the current customization mode.

The last door closed locking mode is enable when the vehicle was manufactured. Disconnecting the vehicle battery for up to a year will not change the mode.

EXIT ILLUMINATION AND DELAY ILLUMINATION
Refer to Interior Lights Circuit Description in Lighting Systems. Description and Operation