Last Door Closed Locking

The BCM activates the last door locking feature when the following conditions exist:
^ The last door locking mode is enabled. Refer to Feature Customization for more information. Feature Customization
^ A vehicle door is open.
An open vehicle door causes an open signal in CKT 49 and CKT 727.
^ The key is removed from the ignition switch. This action disables lockout prevention.
When the key is removed from the ignition switch, there is an open signal in CKT 80.
^ You press LOCK once on a door lock switch or keyless entry transmitter.

When you press LOCK, the BCM sounds the chime 3 times. The chime indicates that the last door locking feature is active. The BCM locks all of the doors 4.5-5.5 seconds after all of the doors are closed.

Complete the following steps in order to cancel the last door closed locking feature:
1. Press UNLOCK on a door switch or on a keyless entry transmitter.
2. Turn the ignition switch to the ACC or the RUN position.

Press LOCK twice in order to override the last door closed locking feature. The BCM locks all of the doors immediately with a door still open.