Mirror Replacement - Power Mirror

REMOVAL PROCEDURE
The outside mirrors are stud mounted to the door metal. The mirror face can be replaced without removing the entire mirror. The left side flat and right side convex mirror faces must be replaced with the same type mirror face when serviced.




1. Remove the trim panel.
2. Disconnect the electrical connectors.
3. Remove the mirror reinforcement cover.
4. Remove the nuts from the mirror.
5. Remove the mirror.

INSTALLATION PROCEDURE




1. Position the mirror to the door.

NOTE: Refer to Fastener Notice in Service Precautions.

2. Install the nuts.
Start at the lower left nut. Tighten in a clockwise direction.

Tighten
Tighten the outside mirror nuts to 10 N.m (89 lb in).

3. Install the mirror reinforcement cover.
4. Connect the electrical connectors.
5. Install the trim panel.