Front/Rear Brakes - Revised Tool Requirements: Overview
File In Section: 05 - BrakesBulletin No.: 01-05-23-003
Date: March, 2001
SERVICE MANUAL UPDATE
Subject:
Revised Tool Requirements for Front and Rear Brake Caliper Overhaul
Models:
1997-2001 Buick Park Avenue, Regal
1997-2001 Buick Regal (Export China)
2000-2001 Buick LeSabre
1997-2001 Cadillac DeVille, Seville
2000-2001 Cadillac Eldorado
1997-2001 Chevrolet Trans Sport (Export China), Venture
2000-2001 Chevrolet Impala, Lumina, Monte Carlo
1997-2001 Oldsmobile Aurora, Silhouette
1998-2001 Oldsmobile Intrigue
1997-2001 Pontiac Grand Prix, Montana, Trans Sport
2000-2001 Pontiac Bonneville
This bulletin is being issued to revise the tool requirements for the front and rear brake caliper overhaul procedures in the Disc-Brake sub-section of Brakes in the appropriate Service Manual. Please use the following to replace the existing information in the Service Manual.
This information has been updated within SI2000. If you are using a paper version of this Service Manual, please mark a reference to this bulletin on the affected page in the Disc Brake sub-section of the Service Manual.
DISCLAIMER