Park Brake Support Replacement

REMOVAL PROCEDURE





1. Raise and suitably support the vehicle.
2. Remove the tire and wheel.
3. Remove the brake caliper bracket.
4. Loosen the brake cables at the equalizer (2).





5. Remove the cable from the actuator lever.
6. Remove the parking brake return spring.





7. Remove the cable from the parking brake bracket (8).
8. Remove the parking brake bracket (8) from the support plate (2) bolts.
9. Remove the parking brake actuator (5).
10. Remove the rear wheel hub.
11. Remove the parking brake shoe.
12. Remove the support plate (2).


INSTALLATION PROCEDURE





1. Install the parking brake support plate (2).
2. Install the parking brake shoe.
3. Install the rear wheel hub.
4. Install the parking brake actuator (5).

NOTICE: Refer to Fastener Notice in Service Precautions.

5. Install the parking brake bracket onto support plate (2).

^ Tighten the parking brake bracket bolts to 10 Nm (89 ft. lbs.).





6. Install the parking brake return spring.
7. Install the cable onto the parking brake bracket.
8. Install the cable onto the actuator lever.





9. Tighten the nut on the equalizer in order to remove the slack in the cable.
10. Install the brake caliper bracket.
11. Install the tire and wheel.
12. Lower the vehicle.
13. Adjust the parking brake.