61. Balance Shaft Bearing and/or Bushing Installation

^ Tools Required
- J 21465-13 Drive Handle Extension
- J 36995 Balance Shaft Bearing Remover/Installer





1. Dip the balance shaft bushing in clean engine oil.

Important: The J 36995 installs the balance shaft bushing to the correct depth. The balance shaft bushing is properly installed when J 36995 fully contacts the balance shaft bore or the engine block/transaxle mounting flange.

2. Use the balance shaft bushing installers to install the balance shaft bushing.
3. Remove J 36995.





4. Dip the balance shaft bearing into clean engine oil.
5. Use J 21465-13 and J 36995 to install the balance shaft bearing into the engine block.