74. Oil Filter Adapter Installation

^ Tools Required
- J 36660 Torque Angle Meter





1. Install the oil pressure relief valve spring into the engine front cover.
2. Install the oil pressure relief valve into the engine front cover.
3. Install a new oil filter adapter gasket.
4. Install the oil filter adapter.

Notice: Refer to Fastener Notice in Service Precautions.

5. Install the oil filter adapter bolts.
Tighten the oil filter adapter bolts to 15 Nm (11 ft. lbs.).
Use J 36660 to tighten the oil filter adapter bolts an additional 50 degrees.