Transmission Shift Position Indicator Lamp: Service and Repair

Trans Shift Control Indicator Lamp Replacement (Bulb)





REMOVAL PROCEDURE
1. Remove the front floor console trim plate.
2. Grasp the floor shift control trim bezel and lift to release the retaining tabs.
3. Rotate the floor shift control indicator lamp socket counterclockwise to release from the trim bezel.
4. Remove the bulb from the socket.

INSTALLATION PROCEDURE
1. Install the bulb to the socket.
2. Install the floor shift control indicator lamp socket to the trim bezel, then rotate the socket clockwise to secure.
3. Install the floor shift control trim bezel into position and press into place to secure the retaining tabs.
4. Install the front floor console trim plate.