Circuit Description

The horns will operate anytime the horn switch is pressed.

The horns will also operate when the following Systems are enacted:
^ The remote lock/unlock verification (BCM)
^ The warnaway alarm (keyless Entry)

Battery voltage is applied at all times to the horn relay through the 740 circuits.

When the horn switch is closed, the chassis ground from the steering wheel (circuit 1550 also provides an redundant ground to the steering wheel), travels through circuit 28 and energizes the horn relay.

Circuit 150 also provides a redundant ground to the steering wheel.

The horn relay can also be energized by the BCM grounding circuit 28.

When the horn relay is energized, the switch in the horn relay closes and applies battery voltage to the horns through circuit 29. Circuit 29 activates the horn, which is grounded through circuit 1350 to G101.