Battery Hold Down Retainer Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the battery ground (negative) cable.
2. Remove the battery hold down retainer bolt.
3. Remove the battery hold down retainer.

INSTALLATION PROCEDURE
1. Install the battery hold down retainer.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the battery hold down retainer bolt.

Tighten
Tighten the battery hold down retainer bolt to 25 N.m (18 lb ft).

3. Connect the battery ground (negative) cable.