Ignition Switch

IGNITION SWITCH REPLACEMENT - FLOOR SHIFT

REMOVAL PROCEDURE
1. Disconnect the battery negative cable from the battery. Service and Repair
2. Disable the SIR system. Service and Repair
3. Remove the steering column shrouds. Steering Column Trim Covers
4. Remove the ignition switch. Ignition & Key Alarm Switch - Disassemble

INSTALLATION PROCEDURE
1. Install the ignition switch. Ignition & Key Alarm Switch - Assemble
2. Install the steering column shrouds. Steering Column Trim Covers
3. Connect the battery negative cable to the battery. Service and Repair
4. Enable the SIR system. Service and Repair