Tilt Head Housing - Disassemble

DISASSEMBLY PROCEDURE

- Tools Required
- J 23653-SIR Lock Plate Compressor
- J 42137 Lock Plate Compressor Adapter

IMPORTANT: Let the SIR coil assembly hang freely after removal.





1. Remove the SIR coil assembly.
2. Compress the shaft lock shield assembly (2) using J 23653-SIR and J 42137.
3. Remove and discard the bearing retainer (1) from the steering shaft assembly.
4. Remove J 23653-SIR and J 42137 from the steering shaft assembly.





5. Remove the following components from the steering shaft assembly:
5.1. The shaft lock shield assembly (5).
5.2. The turn signal cancel cam assembly (4).
5.3. The upper bearing spring (3).
5.4. The upper bearing inner race seat (2.
5.5. The inner race (1).