Rear

REMOVAL PROCEDURE





1. Raise and support the vehicle.
2. Remove the tires and wheels.
3. Remove the rear right stabilizer shaft link bolts.
4. Remove the rear left stabilizer shaft link bolts.
5. Remove the insulator brackets and the bolts from the stabilizer shaft (2).
6. Remove the stabilizer shaft (2) from the rear suspension support (1).


INSTALLATION PROCEDURE





1. Install the stabilizer shaft (2).
2. Install the stabilizer shaft insulator brackets and hand the bolts. Do not tighten the nuts at this time.
3. Install the right and left rear stabilizer shaft link nuts.
- Tighten the stabilizer shaft link nuts to 35 Nm (26 ft. lbs.).
- Tighten the stabilizer shaft insulator bracket bolts to 48 Nm (35 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

4. Install the tires and wheels.
5. Lower the vehicle.