Body Control Module (BCM) - Re-Learn Using A T-50 or T-60

1. Enter the T-50 or T-60 Service Programming System (SPS).
2. Select TERMINAL TO VEHICLE PROGRAMMING.
3. Select DONE.
4. Follow the instructions on the VEHICLE SETUP screen.
5. Select THEFT MODULE RE-LEARN.
6. Follow the instructions on the remaining screens.
7. The PCM and the BCM will be prepared for re-learn.
8. A security timer will turn on for approximately 10 minutes. During the 10 minute wait period, ensure that the T-50 or T-60 terminal remains connected to the vehicle.
9. When the PCM and the BCM are prepared to re-learn, turn the ignition switch to the OFF position.
10. Turn the ignition switch to START position. The vehicle should now start.