39. Driven Sprocket Support Assemble

^ Tools Required
- J 8092 Driver Handle
- J 28677 Drive Sprocket Support Bearing Installer





1. Install the drive sprocket support assembly (522).

Notice: Refer to Fastener Notice in Service Precautions.

2. Install the four drive sprocket support bolts (524).
^ Tighten the bolts to 25 Nm (18 ft. lbs.).





3. Assemble J 28677 and J 8092.

Important: Install the bearing (521) with the marked side facing up.

4. Using the assembled tool, install the drive sprocket support bearing assembly (521).