9. Wiring Harness Disassemble

1. Using a small screwdriver, pry the wiring harness (224/225) electrical connectors off of the following components:
^ Automatic transaxle fluid pressure manual valve position switch assembly (395)
^ 1-2, 3-4 Shift solenoid valve assembly (315A)
^ 2-3 Shift solenoid valve assembly (315B)
^ TCC PWM solenoid valve assembly (334)
^ Pressure control solenoid valve assembly (322)
^ Automatic transaxle input speed sensor assembly (440)
^ IMS (811)
2. Gently pull the automatic transaxle fluid temperature sensor (391) from it's clip.





3. Lift the wiring harness assembly (224/225) off of the transaxle.